- Click here to download a .pdf of this complete brochure in English (2012 Version)
- Click here to download brochure in Spanish/haga clic aquí para descargar
- Click here to download brochure in French/cliquez ici pour télécharger
Jewelry for Initial Piercings [Rev 04/04/2017]
(Web version updated April 04, 2017. Brochures will be updated ASAP!) Choosing jewelry for a new piercing is obviously quite different from shopping for a ring to wear on your finger. Because body jewelry is worn inside a wound and is in contact with your internal tissues, only certain products are suitable. The look of the jewelry that is placed in your fresh piercing must be secondary to aspects that affect safety and compatibility with your body. The size, style, material, and quality of the initial piece of jewelry all affect your ability to heal. Remember that the piercing location is fixed, but the jewelry can be changed after you have successfully healed. Because the body jewelry industry is saturated with substandard products, piercers and clients alike may forget that cost alone should never be the key factor in your purchase. Consider the following when selecting body jewelry for a new piercing:
Jewelry Size and Style
- Must be of appropriate length or diameter for your unique anatomy and the placement of the piercing. Jewelry that is too tight does not allow for air and blood circulation or for the expulsion of normal secretions from the piercing. Ill-fitting jewelry increases the likelihood of swelling, embedding, and other complications if too small, or catching and excessive trauma, if too large.
- Must be of an appropriate gauge (thickness). The body may treat jewelry that is too thin in gauge like a splinter, resulting in migration or rejection.
- Must be of a style suited to your build and the location of the piercing. Rings are best for some areas, straight or curved bars for others, and specialty jewelry—such as a nostril screw or labret stud—for specific placements.
Of the numerous materials available, few have been proven appropriate for wear in fresh body piercings. Some metal alloys (mixtures) have been approved based on medical usage (often as medical implants) and have specific designations that represent a precise standard for the alloy and its quality as determined by as determined by the American Society for Testing and Materials International (ASTM) and/or the International Organization for Standardization (ISO). Other materials, such as gold and obsidian (natural glass) have a long history of use in piercings dating back hundreds—and sometimes thousands—of years.
The material worn in a healing piercing:
- Should be able to withstand the heat and pressure of autoclave sterilization.
- Should be inert and compatible with the body so it doesn’t cause irritation, allergy, or infection.
Mill test certificates are documents that provide evidence of a specific grade of metal with an ASTM or ISO code designation. These are provided to jewelry makers by the manufacturers of the raw materials. Some jewelry companies also have biocompatibility testing done by independent labs. Your piercer may have copies of these certificates available for you to review. You don’t need to understand what the numbers mean, but the document should warrant that the metal is one of the grades listed below. It is not possible to know whether the piece of jewelry you’re buying is from the batch indicated on the paper, but the presence of documentation listing the appropriate materials means that your piercer is more likely to be purchasing from reputable sources and is conscientious about their jewelry quality. (See current APP Jewelry Standards)
- Surgical Steel is made of a variety of alloys. Many of them are used for body jewelry, but only a few specific grades are proven biocompatible: steel that is ASTM F138 compliant or ISO 5832-1 compliant; ISO 10993-(6,10, or 11) compliant. [Note: The EEC Nickel Directive is a regulation that requires a low rate of nickel release for all materials used for costume or fine jewelry, belt buckles, watches, or other metallic accessories with direct skin contact. It does not specify nor prove that a material is safe to wear in the body; therefore, compliance with this directive alone is not sufficient for meeting the APP initial jewelry standards.]
- Titanium is a lightweight metal that is ideal for people with concerns about nickel sensitivity. This material can be anodized to create jewelry of different colors without affecting the safety. Look for implant certified titanium (Ti6Al4V ELI) that is ASTM F136 compliant or ISO 5832-3 compliant, or commercially pure titanium that is ASTM F67 compliant.
- Niobium has been widely used by piercers with good results for many years. It is very similar to titanium, but does not have an implant-grade designation. Like titanium, niobium can be anodized to produce different colors. (And, unlike titanium, it can be heat treated black.) Anodized niobium and titanium may fade due to body chemistry or when worn in friction-prone areas, but this is not harmful.
- Gold (yellow, white, or rose) is appropriate for initial piercings if it is solid 14k or 18k, alloyed for biocompatibility, and free from nickel or cadmium. Gold higher than 18k is too soft for body jewelry because it can easily be scratched or nicked. Gold lower than 14k, gold plated, gold-filled, or gold overlay/vermeil jewelry is not acceptable for fresh piercings.
- Platinum is a heavy precious metal that is extremely inert and excellent for wear in body piercings. However, body jewelry in this material is rare and very expensive due to the high cost of the material and greater difficulty in manufacturing jewelry from it.
- Biocompatible polymers (plastics) including Tygon® Medical Surgical Tubing ND 100-65 or ND 100-80, or PTFE (Teflon®), are considered suitable for new piercings. Tygon is a bio-compatible medical tubing that is highly flexible. It should be changed every few months as it stiffens and discolors from extended wear. PTFE, a white plastic, is widely accepted within the industry. Some polymers are marketed specifically for piercings in an array of colors and shapes. These may be worn as a substitute for metal jewelry. With new polymer products coming into the marketplace, check that the product you are purchasing, if not listed above, is USP VI compliant. These can be sterilized in an autoclave.
- Glass—Fused quartz glass, lead-free borosilicate, and lead-free soda-lime glass are inert and considered safe for initial piercings. They can also be sterilized in an autoclave.
Jewelry Quality (and other things to know)
- The surfaces and ends of body jewelry must be free of nicks, scratches, burrs, and polishing compounds. Suitable pieces have no irregular surfaces that could endanger the delicate healing tissue of a fresh piercing. Metal body jewelry should be polished to a smooth, mirror finish. If you wear jewelry that has a porous or uneven surface, the new cells that form during healing grow into the irregularities. Then, when the jewelry shifts or moves, these areas tear. As this cycle is repeated, scar tissue forms and healing is delayed. A faulty finish can also introduce bacteria into the wound and cause infection.
- Quality rings are annealed, which is a heat treatment that makes the metal more pliable. When rings can be opened or closed without the use of pliers it reduces the risk of damaging the metal. For thicker rings (especially in smaller diameters) the use of tools may be necessary. Tools should have brass jaws or be covered with tape or gauze to protect the jewelry from damage.
Threaded jewelry uses tiny screw threads for their closures. One side has male screw threads that fit into a female hole that is tapped (drilled out) with the matching thread pattern on the other. One or both ends unscrew.
- Machining of the jewelry affects how it performs. Losing your jewelry can result in the closure of your piercing. Threaded ends should be checked for tightness daily with clean hands. If they come loose often, you may have a defective piece. See your piercer for options or a replacement part. If the ball on your captive ring comes off or is loose, you may need a new ball, or to have the tension on the ring adjusted. Jewelry should fit together well. Threaded attachments should fit completely onto posts without gaps. Threads on screw-on ends and dimples on captive pieces should be centered for a proper fit.
- Not all piercings have an entrance and an exit. Surface Anchors are very common now and the jewelry sits below the surface of the skin from a single point. The threaded top may be changed. Removing the base of the jewelry causes the loss of the piercing, so this is not normally done. See your piercer for assistance if the piece shifts or migrates.
- Gemstone settings must be of high quality; stones should be set securely into the metal, often in a prong or bezel setting. Some manufacturers use adhesives to attach the gem. If the stone falls out, which is common with lower-priced goods, the entire piece of jewelry will need to be replaced as the hole left by the missing gem can harbor bacteria and increase risk of infection.
For information about jewelry and materials suitable for healed piercings, and for jewelry removal instructions see our brochure:
Photos courtesy of Paul King, www.coldsteelpiercing.com. Threadless bar photo courtesy of Neometal, www.neometal.com. Surface anchor photo courtesy of Industrial Strength Body Jewelry, www.isbodyjewelry.com. Diagram and text from The Piercing Bible by Elayne Angel, www.piercingbible.com.